Iron-on Decal Application Instructions

To apply your iron-on decal, you can use a:

• Regular home iron
• Heat press
• Cricut EasyPress or Mini EasyPress

• Set iron dial between Cotton and Linen
• Cover design with Teflon sheet or piece of parchment paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace Teflon sheet and re-press for 5-10 seconds
• Peel clear carrier sheet hot or cold

• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel clear carrier sheet hot or cold